Brief introduction:

Automatic partial collector BS-160A (LCD display): collection tube: 160 tubes, each large capacity: 5ml, timing collection range: 1s-24h, optional, power-off data saving function, storage time: 10 years. Automatic part collector BS-160A (LCD display) new microcomputer chip control; LCD Chinese super large blue film LCD display mode, menu operation, function prompt.

Details:

1、 Product introduction

Automatic partial collector, also known as component collector and fraction collector, is one of the basic equipment for biochemical experiment and biopharmaceutical production. It is used to automatically and quantitatively collect the liquid drops from the chromatographic column, so as to load different active components into different test tubes. Jiapeng automatic partial collector is a device that can automatically separate the solution separated from the chromatographic tube according to the quantitative amount when separating some mixed substances by chromatography. It is suitable for the departments of scientific research, medical treatment and other colleges and universities to carry out the liquid chromatography layer analysis experiment. The instrument can automatically separate and collect the chromatographic liquid, so as to replace the manual operation and improve the work efficiency, The system is composed of Jiapeng nucleic acid protein detector / ultraviolet detector, constant flow pump, chromatographic column and data workstation. This series of automatic partial collectors adopt new micro-computer chips, which can automatically collect regularly, count drops, record peaks, collect chromatographic solution, realize automatic sampling and collection, improve collection quality and work efficiency. It is an ideal instrument for scientific research institutions, factories and mining enterprises to engage in scientific research and production, and has been widely used in Tsinghua University, Peking University, Fudan University and other universities.

2、 Automatic partial collector BS-160A (LCD display) product features:

（1） Fully closed environment-friendly molecular strength ABS material, injection mold secondary molding, firm and beautiful;

（2） The design of 35 ° oblique angle control panel conforms to ergonomics and can be easily controlled without bending down;

（3） Chinese LCD large blue film LCD display mode, new micro-computer chip control;

（4） Unique digital mark design of collecting plate, each test tube corresponds to 1 number, which ensures that the tube is taken according to the number;

（5） Collection function: automatic collection, can be selected at will, collection tube change does not deviate, tube change positioning;

（6） Timing function: collect time, reverse and clockwise timing can be selected at will, the same specification of test tube tray can be freely interchanged, and there is no need to check the number in place;

（7） Parameter setting function: parameters, setting tube and end tube can be set arbitrarily;

（8） Keebio fluid cut-off valve is adopted, and the test tube disk is resistant to organic solvents (optional);

（9） External trigger function: special COM interface is directly connected to control constant flow pump.

3、 Technical parameters of BS-160A (LCD display) of automatic partial collector:

Next:Full automatic partial collector BS-100A

Previous:Fully automatic partial collector BS-160A