Autoclave
Your current location:Home / Recommend / Common laboratory equipment / STIK / AutoclaveAutomatic high-pressure steam sterilizer - tank diameter Φ450 （65L/85L/100L/120L）
characteristic:
-The sterilization temperature can be set up to 138 ℃
-Using PT1000 sensor, the temperature control is more accurate, and the display accuracy is 0.1 degrees
-Electronic water level sensor and temperature water level sensor have two water level monitoring functions
-With level 5 password setting function, it can be used for data traceability of pharmaceutical factories, meets the requirements of GMP and FDA certification, and can print FO value
-It can be equipped with pressure gauge with negative pressure up to 0.5, overcurrent and short circuit protection system
-Standard configuration: optimized dry burning prevention function, overtemperature protection system, overvoltage protection, safety valve
-Cover opening and stop heating function
-Real time data saving function, memory storage of 60 programs, programmable sterilization programs in various modes
-Voice prompt function
-After sterilization, the exhaust valve can exhaust steam according to the set six-stage exhaust speed, and the exhaust speed can be manually adjusted at any time during the exhaust process
-FreeRTOS embedded operating system
-Standard USB flash disk real-time data recording
-With automatic detection, check and compare the functional relationship between temperature and pressure to ensure that the real saturated steam state is achieved
-Automatically detect the discharge of cold air to ensure the function of steam internal discharge and protect the pollution-free environment
-The boiling point temperature can be adjusted according to the altitude
-The exhaust temperature can be adjusted within the boiling point temperature plus 0-25 degrees
-Dual temperature sensors can detect air temperature and water temperature
-One article sensor hole on the pot cover and two verification holes are reserved on the tank body to facilitate verification and connection
-Self sensing pressure interlocking device, cover closing inspection system, leakage protection device
Easy to operate:
Many advantages: safer and more thorough sterilization
security
Pressure interlocking mechanism -Start up, sterilization start, micro position switch in real time during sterilization Monitor the position of the interlocking mechanism. In case of abnormal alarm, stop the machine to ensure safety. -As long as there is pressure in the chamber (with pressure sensor), the pot cover cannot be opened. -The pot cover cannot be opened when the power is suddenly cut off during sterilization. -After sterilization, the temperature in the cavity is lower than 90 ℃, and the cover opening temperature can be set arbitrarily in the circle. |
-Double overpressure protection -Double overtemperature protection -Prevent dry burning -Pressure sensor -Leakage protector -Automatic intelligent control system |
technical parameter
-The test technical data is only applicable to the test results at the ambient temperature of 25 ℃ under the no-load condition of the equipment!
-The product appearance and parameters are changed without notice. Please understand that the product appearance deviates due to photography and printing!
Options and accessories
-Printer (print content: pressure holding in the pot during sterilization, sterilization temperature and time)
-Item sensor
-3Q certification
-Full internal drainage
- Next:Automatic high pressure steam sterilizer - inner diameter Φ370 （54L/78L）
- Previous:No Content!
WeChat scan