STIK
Your current location:Home / Recommend / Laboratory box / STIKCarbon dioxide incubator(Water jacket/air jacket)
Features:
- 7-inch touch screen display control interface
- Humidity display function (optional)
- With automatic zero calibration
- 90 degree high temperature and high humidity disinfection
- Direct heating with glass door and control of glass door temperature rejection
Glass door condensation and temperature uniformity
- Door switch monitoring function
- Logging function
- Fault monitoring, alarm, recording function
- Level 4 password function: login password, operator password, administrator password,
Advanced administrator password
- Three power-off mode selection functions: power failure recovery, stop or restart
- Curve display function
- GPRS SMS alarm function (optional)
- Real-time data and historical data printing
- Ambient temperature detection function
- Comprehensive arc design to reduce bacterial growth environment
- 232 communication interface
- 485 communication interface
Precise temperature control:
Two circulation fans are equipped with two internal circulation university filters (HEPA):
The pollution brought in by the outside of the door is instantly cleaned and the culture is safer. The co2 concentration quickly returns to constant after the door is opened, and the cells are at the most Suitable for growth in a pH environment |
technical parameter
Gas carbon dioxide box | Water jacket carbon dioxide tank | ||
model | ILDT-185IU | ILDT-185IH | ILW-185TI |
Volume (liter) | 185 | 185 | 185 |
Temperature control range | Ambient temperature +5~60℃ | ||
Temperature uniformity | ≤±0.4℃ | ||
Temperature control accuracy | <±0.1℃ | ||
Temperature recovery time (open the door for 1 minute) | ≤5 minutes | ||
operational environment | Less than 5℃ of the set temperature (it is recommended that the ambient temperature be 8℃ lower than the set temperature for long-term use) | ||
CO2 concentration range | 0~20% | ||
CO2 control accuracy | ±0.1% | ||
CO2 sensor | Imported infrared (IR) sensor | ||
CO2 recovery time (open the door for 1 minute) | ≤5 minutes | ||
Disinfection mode | ultraviolet lamp | 90℃ high temperature and high humidity | Alcohol wipe |
Internal circulating high efficiency filter | 2 | 2 | 2 |
Air inlet high efficiency filter | 1 | 1 | 1 |
Heated glass door | select to breed | select to breed | select to breed |
Humidification mode | Humidifying plate | ||
Humidity display | select to breed | ||
Humidity range | 92%RH±3% | ||
Automatic gas cylinder converter | select to breed | select to breed | select to breed |
printer | select to breed | select to breed | select to breed |
Working temperature | 5~35℃(It is recommended that the ambient temperature should be lower than 30℃ during long-term operation.) | ||
Power Supply | AC220V±10%50HZ/80HZ | ||
Inner container size(W*D*H)mm | 540*510**680 | ||
outline dimension(W*D*H)mm | 710*695*985 | ||
Partition (standard) | 470*470(4 blocks) | ||
Maximum power | About 800W | ||
Factory plug as standard | 10A | ||
product weight | About 150kg | About 165kg |
-The test technical data is only applicable to the test results under the no-load condition of the equipment and the ambient temperature is 25 degrees!
-The appearance and parameters of the product are subject to change without notice. The appearance of the product may vary due to photography and printing. Please understand!
Options and accessories
-Humidity Sensor
-Automatic cylinder converter
- SMS alert (GPRS)
-printer
- Next:No Content!
- Previous:No Content!